By rustan Offering unique possibilities for the wind power industry
Easy-Laser® measurement and alignment systems for the wind power industry

There are many applications for the Easy-Laser® systems in the wind power generation industry. It’s a fact that Easy-Laser® is one of the world’s largest suppliers of laser based measurement systems to the manufacturers and service companies of the wind power industry.

This applies to, for example, systems for the alignment of gearboxes and generators, both in production and out in the field during continuous maintenance work. We offer both standard systems and custom made systems for specific makes of turbines. One example is a bracket for use with locked rotor, when the coupling has to be dismounted during alignment for safety or other reasons. Thanks to its clever design, this one bracket fits all MW models from one manufacturer, regardless of coupling size.

Another large application is the system for measuring flatness on tower flanges. The Easy-Laser® systems can measure not only complete 360° flanges as usual, but also 1/3 and ½ tower sections. A unique possibility is the sectional program, where four sections of a flange are measured, then mathematically merged into a full circle. This method eliminates possible errors caused by the tower weight, especially with large offshore towers (diameters larger than 4 meters). It also makes it safer because the whole measurement can be made at ground floor instead of climbing on tall ladders.

For manufacturers of vanes, we also supply equipment for measuring and aligning the centre line of the jigs, as well as their squareness.

Take a look for yourself!

Comments are closed.